L.O.2 planning what i will make

To help me get an idea of what I am going to make I made several designs of it and saved them separately. The first is my model without any detail. I made this to show the basic shape of the ship I will make. While making the first design I lowered the height of the boat deck because I thought that it was too high and it would not look very good. The second design is on I drawn with some additional detail. In this design I have changed some parts of the ship. I added a mast at the front of the ship. I did this to give the ship more detail. Another change I made was to make the bridge shorter because before I made the change it went too far back. The final change I made was to add a flag at the back of the ship. The next design I made was the same as the second but I have drawn lines across the ship to show the different decks and so that when I put portholes on it will be easier to line them up so they are in the right place. The fourth design I made added colour to the design. I am not using too many colours on the ship. I am using red, black, white, orange, brown and a strip of gold along the side of the ship. A few changes I made to the design of the ship was to add a second mast at the back. I did this to make the ship look a bit more even. Another change I made was to add small whistles to all of the funnels. They would have been used to release high pressure steam. I put the on to make the ship look better. I also changed the shape of a part of the back of the ship from a square to a different shape. The final design I made added a hole for the anchor and 3 propellers at the back of the ship. Both of these changes were to add detail to the ship. The only other difference is that on my final design I have annotated it to show where everything would be if it was a real ship.